A tough and compact sport aviation
Gascolator with some great features. Suitable for engines up to 140 HP this gascolator acts as a water and small particle trap. A unique method of attaching the bowl to the body allows for easy maintenance. By pulling out the locking safety pin then rotating the bowl through 35°, the bowl can be pulled off and the internals inspected.
It only takes 30 seconds! Features include: A PTFE coated 70 micron stainless steel mesh is used as the filter screen, 1/4" NPT inlet & outlet ports machined directly in to the gascolator body, 1/8" NPT bowl drain and top connection that can be used as a fuel pressure gauge mount point or for filtered fuel engine priming, a self bleeding vent allows trapped air to escape, O-ring seals allow use with most pressurised fuel systems. Mounts by way of 3-1/4" UNF to rear of gascolator. Unlike many cheap gascolators the drain hole is on the bottom of the gascolator ensuring water and and other contaminants can be removed with a fuel drain. Pipe fittings are not included.
Upgrade to a quality gascolator NOW ...Fuel Gascolator GOOD QUALITY $259.00 Designed and manufactured in Europe.
Blanking Plug $7.90 For top of gascolator - if needed.
